Fully automatic insulating glass panel inflation line 2536
1. The loading section uses universal wheels for convenient handling by a robotic arm.
2. Capable of producing oversized, small-sized, triple-layer, and irregular-shaped insulating glass.
3. The cleaning rubber roller can automatically adjust based on the glass thickness.
Detailed features:
1. Thermal insulation performance: aerated insulating glass has better thermal insulation performance than non-aerated insulating glass. Inflation increases the pressure in the hollow layer, increases the frequency of collisions between gas molecules, and therefore reduces heat conduction
2. Anti-condensation performance: aerated insulating glass has better anti-condensation performance. Because the gas in the aerated insulating glass has a high temperature and slow humidity change, condensation on the glass surface can be avoided
3. Strength and sustainability: The internal pressure of aerated insulating glass makes it have higher strength and durability, reducing the possibility of extrusion and bending deformation
4. Precautions: The aeration of insulating glass needs to be strictly controlled and monitored to ensure that the aeration pressure meets the design requirements. At the same time, during installation and use, excessive force or extrusion on the insulating glass should be avoided to prevent internal gas leakage or window breakage
Main features:
full PLC control, frequency conversion control. Glassless entry equipment automatically stops running, reducing energy consumption.
two glass, three glass, size pieces, shaped insulating glass processing function.
Automatic testing device for glass thickness, length and height.
The feeding section is equipped with a contact coating testing device, which is stable and reliable.
High power, high pressure fan, stainless steel air knife, fast drying speed.
The fan has a damper, no glass intermittent no-load operation, reduce energy consumption, with automatic sleep function.
03/04 The cleaning output section and the aluminum frame positioning section can store two small pieces of glass to improve production efficiency.
The l04 section has the function of taking and placing glass at will.
Aluminum frame positioning using aluminum alloy profile, equipped with position display, easy to adjust the glue depth.
external plate is hydraulic control, stable and reliable operation.。
The flat pressing section adopts servo pressing. According to the size of the glass, the pressing torque is calculated automatically to ensure that the glass is pressed evenly and not broken.
in-board inflation function, using under charging mode, fast inflation, high concentration.
The suction cup is equipped with an anti-contact valve to reduce air consumption and ensure that the glass is firmly adsorbed without sagging.
has the function of anti-glass droop and automatic film taking when the inner film is combined.
Technical parameters:
Minimum glass size: 480*280mm
Maximum glass size: 2000*2500mm
Work direction: customer requirements
Cleaning speed: 2-15m/min
Maximum working speed: 15-28/min(can be increased according to demand)
Water supply: Circulating water, 0.5 tons/day, electrical conductivity ≤50μs
Ambient temperature: 10℃-30℃ according to DIN40040
Relative air humidity: ≤75% according to DIN40040
Insulating glass type: two glass, three glass
Optional: In-board inflation
Related News
Submitted successfully
We will contact you as soon as possible